LEGRAND Whad HE 800 Manuel D'installation Et D'utilisation page 32

CONSTRUCTION SPECIFICATIONS
Electrical output characteristics (normal mode)
Output
Rated output voltage (V)
Rated output frequency (Hz)
Rated output current (A)
Crest factor admitted on the output current
Total harmonic distortion of output voltage on
linear rated load
Total harmonic distortion of output voltage on
non-linear rated load (PF=0,7)
Overload capacity
Permitted applied load power factor range
Efficiency
at 50% of the load
at 75% of the load
at 100% of the load
Electrical output characteristics (battery mode)
Rated output voltage (V)
Rated output frequency (Hz)
Rated output frequency (Hz)
Total harmonic distortion of output voltage
on linear rated load
Total harmonic distortion of output voltage
on non-linear rated load (PF=0,7)
Overload capacity
32
®
3 101 60 3 101 61
3 101 63 3 101 64
3 100 86 3 110 14
1 x IEC C14
230 ± 1%
50 / 60 (synchronised with the input)
50 / 60 ± 1% (if not synchronised with the
3,5
200% for at least 2 seconds without automatic
bypass activation
150% for at least 5 seconds without automatic
bypass activation
100% for at least 10 seconds without automatic
bypass activation
PF 0,7-1
90,7%
92,3%
93,0%
230 (adjustable in steps of 1V from 184V
to 255V using the software)
50 / 60 ± 1%
> 100% per 15 secondi
PF 0,7-1
7 Technical data
3 101 62
3 101 65
3 110 15
input)
4,4 6,6
3,5:1
< 1%
< 3%
91,7% 93,0%
93,0% 93,5%
93,3% 93,4%
< 1%
< 3%