Main Features - SciCan StatClean Mode D'emploi

INTRODUCTION
Use filtered water for best results.
PRINCIPLES OF ULTRASONIC CLEANING
Millions of tiny air bubbles are generated within liquid by high frequency vibration. The air bubbles
burst when in contact with object and dislodge the debris to achieve the cleaning effect.
Using tap water is sufficient; however, it is recommended to use filtered water for best results.

Main Features

• Tank opening 32.5 x 20.5 x 9.9 cm / 12.8"x 8.1"x3.9".
• Longest item that can fit inside the tank is 34.0 cm / 13.4". 6.0 L / 1.6 gallon tank capacity.
• Multiple options for accessories, suitable for various applications.
• 2 industrial grade ultrasonic transducers: 2 x (55~60)W=(110~120)W.
• 2 ceramic heaters: 2 x (78~87)W=(156~174)W.
• 3-color LED display, 7-key controls, 6 quick timer settings, adjustable to any minute between
1-30 minutes, 5 temperature settings in both F and C, simple and straightforward to operate.
• Control panel with capacitive sensing technology. Durable, reliable, resistant to water and harsh
chemicals.
* Advanced power-off memory that recalls last timer and temperature settings
• Electrical circuit features:
Two stack transducers, each has an independent PCB control. The output power is
1.
increased by 40% compared to less expensive control method that uses one PCB to
control multiple transducers. Stack transducer is about twice more powerful and durable
than wafer transducers
Multiple circuit protectors:
2.
a. Thermal switch to prevent running dry. If temperature is too high, the switch cuts off
power for approximately 6 minutes then reconnect the power.
b. Thermal protector to prevent PCB from overheating due to overload.
c. Timer to prevent heater from running continuously.
• Industrial grade IC. Moisture-proofed PCB. Cooling fan.
• Drainage valve.
Read the Manual First
The manual should be carefully reviewed before starting to use the device. Warnings should be
observed carefully. Please follow the manual for operations.
2