EINHELL PE-ASK 18 Li Basic Mode D'emploi page 132

attended. Unplug the tool when not in use,
before servicing or changing accessories.
m) Always use proper accessories and at-
tachments with this tool. The use of any
accessory or attachment or performance
of any operation with this tool, other than
those recommended in this instruction
manual may present a risk of personal in-
jury.
n) Check for damaged parts. Before us-
ing the tool, carefully check it for damage
to ensure that it will operate properly and
perform its intended function. Check for
misalignment and seizure of moving parts,
breakage of parts and any other conditions
that may affect its operation. Have damaged
guards or other defective parts repaired or
replaced as instructed.
o) Never transport or run the tool without
all guards in place and in perfect work-
ing condition. Guards ensure that the tool
can be operated in its most safe condition.
p) Keep your hands well clear off the grind-
ing wheel. The grinding wheel is sharp.
Coming in contact with it may cause serious
injury.
q) Always use the chain clamp. A secured
chain prevents slipping and provides better
results.
RESIDUAL RISKS
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be
avoided. These are:
- Impairment of hearing if not wearing hear-
ing protection.
- Risk of accidents caused by the uncovered
parts of the rotating grinding wheel.
- Risk of thrown parts from damaged grinding
wheels.
- Risk of thrown workpieces and parts of the
workpiece.
- Health hazards caused by breathing in dusts
developed during work.
ADDITIONAL SAFETY INSTRUCTIONS ON
RISKS DUE TO VIBRATION
a) The declared vibration data represents the
132 EN
main applications of the appliance, but dif-
ferent uses of the appliance or poor mainte-
nance can result in different vibration data.
This may significantly increase the vibration
level over the total working period.
b) Additional safety measure shall be taken to
protect the user from effects of vibration.
Maintain the appliance and its accessories,
keep hands warm and organize work pat-
terns and periods.
FOR USE OF BATTERIES
a) Do not open, dismantle, shred or short-circuit
batteries. Danger of explosion.
b) Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such as
sunshine, fire or the like. Protect from mechan-
ical shock. Keep dry and clean. Keep away
from children.
c) Dispose of properly. Pay attention to environ-
mental aspects of battery disposal. Do not dis-
pose of in household waste.
d) Remove batteries when not using the tool for a
longer period of time.
e) In case of battery leakage, remove the batter-
ies and clean the battery compartment thor-
oughly. Avoid contact with eyes and skin.
f) In case of damage and improper use of the
battery, Vapours may be emitted. Provide for
fresh air and seek medical help in case of com-
plaints. The vapours can irritate the respiratory
system.
For safety instructions for the battery charger
please refer to the manual of the charger.
For safety instructions for Li-ion batteries
please refer to the manual of the battery.