Dräger X-act 7000 Mode D'emploi page 14

en |
Description
These trademarks are only registered in certain countries and not necessarily
the country in which this material has been published.
3 Description
3.1 Product overview
The scope of delivery for the device may additionally include accessories. The
basic set may be combined with sensors and hoses for remote measurement.
This requires the connection of the Dräger X-am pump using the Dräger X-act
7000 Coupler.
3.1.1 Dräger X-act 7000
Graphic A
No. Designation No. Designation
1 X-act 7000 7
2 Device keys 8
3 Display 9
4 LED signal light 10
5 Infrared interface 11
6 Gas inlet 12
3.1.2 Basic set
Graphic B
Please observe and adhere to the instructions for use of additional parts, if
provided.
14
Holder for Coupler
Ring for carrying strap
Battery cover
Retainer for Dräger MicroTubes
Mini USB port
Gas outlet
The following components are included in the scope of delivery:
No. Designation
Basic set:
1 X-act 7000
2 Dräger MicroTubes Demo
3 Torx screwdriver (T10)
4 Carrying strap
5 Ex-protected batteries (5x)
6 Mini USB
7 Instructions for use
3.1.3 Accessories
Graphic C
The device may be used with the following components for remote and sensor
measurements:
No Designation
.
1 X-act 7000 Coupler
2 X-am pump
3 Accessories
3.1.4 Operation and navigation
The device has three keys. These have been positioned on the device below
the displays which they are used to control (Graphic D/1). Below, these are
referred to as softkeys.
Instructions for use
Order number
8610800
8610290
8326823
3356165
3703133
8318657
9300024
Order number
8610810
8327100
www.draeger.com
| ®
X-act 7000