Table des Matières
Publicité
OPERATION
MACHINE COMPONENTS
1
2
6
9
1. Power ON/OFF Twist Grips
2. Handle Height Adjustment Lever
3. Safety Lock Button
4. Speed Select Switch (Dual Speed Model)
5. Circuit Breaker Reset Button
6. Power Cord Hook
7. 15m (50 ft) Power Cord
8. Motor Cover
9. Transport Wheels 102mm (4 in)
10. Scrub Head Base
11. Bumper
10
All manuals and user guides at all-guides.com
3
4
5
7
8
10
11
MACHINE SETUP
Carefully check carton for signs of damage. Report
damages at once to carrier.
INSTALLING PAD DRIVER / PAD / BRUSH
FOR SAFETY: Before leaving or servicing
machine, unplug cord from wall outlet.
1. With the handle in the upright position carefully tilt
the machine backwards and rest the handle on the
floor.
NOTE: Consult your authorized distributor for pad and
brush recommendations. Use only manufacturer
supplied or approved pad drivers and brushes.
2. Position the pad driver/brush on the drive motor
hub and turn it counter-clockwise to engage
(Figure 1).
Pad Driver
OR
Brush
Pad
3. To install pad, position pad on pad driver and tap
with hand to secure.
4. Return machine to the upright position.
Speedshinet 1700LS/1700HD/1700DS/2000LS/2000HD/2000DS (09–02)
FIG. 1
Publicité
Table des Matières
