Table des Matières
Publicité
MACHINE OPERATION
FOR SAFETY: Do not operate machine unless
operator manual is read and understood.
WARNING: Do Not Use Flammable Liquids Or
Operate Machine In Or Near Flammable Liquids,
Vapors Or Combustible Dusts.
This machine is not equipped with an explosion
proof motor. The electric motor will spark upon
start up and during operation which could cause a
flash fire or explosion if machine is used in an
area where flammable vapors/liquids or
combustible dusts are present.
1. Plug the power cord into a grounded wall outlet
(Figure NO TAG).
Grounded
3 Hole Outlet
Ground Pin
FIG. 2
FOR SAFETY: Do not operate machine unless
cord is properly grounded. Do not operate
machine with damaged cord or plug. Do not
operate machine with the use of an extension
cord.
2. For Dual Speed Models select the desired motor
speed. Position switch downward (185rpm) for
scrubbing/stripping OR position switch upward
(300rpm) for spray buffing (Figure 3).
FIG. 3
Speedshinet 1700LS/1700HD/1700DS/2000LS/2000HD/2000DS (09–02)
All manuals and user guides at all-guides.com
300rpm
Speed
Select
Switch
185rpm
3. Lower the handle to a comfortable operating
height by pulling the handle height adjustment
lever upward. Release lever to engage handle
(Figure 4).
Handle
Release
Lever
FIG. 4
4. Before starting the machine, hold the handle so
the machine base is parallel to floor. This will
reduce the abrupt jolt when starting the machine.
NOTE: For first time users, practice with a polishing
pad which is less aggressive.
5. To begin scrubbing, hold the handles firmly,
depress the safety lock button and twist handle
grips forward. Release the safety lock button once
machine starts (Figure 5).
ATTENTION: Use caution when starting out, the
machine will jolt when the twist grips are turned.
FIG. 5
OPERATION
Safety Lock
Button
11
Publicité
Table des Matières
