Lenze EPM-H502 Instructions De Mise En Service page 72

5 Commissioning
Project transfer to the operating unit
Disconnecting from the PC
5.2.3 Disconnecting from the PC
How to disconnect from the PC:
1. Switch off the PC.
2. Switch off the supply voltage for the operating unit.
3. Unplug the EPZ−H111 programming adapter from the operating unit and
the EPZ−H110 download cable from the PC.
4. Switch on the supply voltage for the operating unit.
The operating unit is now ready for operation.
72
l
EDBPM−H502 DE/EN/FR 5.1