Spare Parts Stocking, After-Sales Service; Spare Parts Stocking 10; Address Of After-Sales Service 10 - Siemens SIMOTICS M-1PH8 Instructions De Service

Masquer les pouces Voir aussi pour SIMOTICS M-1PH8:

page de 198

/ 198
Matières
Table des Matières
Signets

Table des Matières

Documents complémentaires

D.2 Instructions de service Frein d'arrêt

Service Instructions NFF

Electromagnetic Double Face Spring – Applied Brake

10.1

Stocking of spare and parts subject to wear is an important precondition for permanent and

reliable functioning of the brake.

Friction disc (2), armature disc (10), brake flange (11) and pinion (15) (for item see Chapter 4.1)

are parts subject to wear.

Warranty will be provided only for the original spare parts supplied by us. We expressly state

that the installation or use of spare parts other than the original ones supplied by us will

negatively affect the design characteristics of the brake and thus have an impact on active

and/or passive safety.

Stromag Dessau GmbH shall have no warranty obligations for any damage caused by the use

of spare parts or accessories other than the original ones supplied by us.

Please bear in mind that often particular manufacturing and delivery specifications exist for

parts manufactured by us or bought from others, and that we offer spare parts to the up-dated

technical conditions and the up-dated legal prescriptions.

10.2

Please specify the following details when ordering spare parts:

10.3

This is our address for after-sales service and spare parts distribution:

If you require a service engineer, please contact our "Technical after-sales service" under the

above address.

148