In - Process Stocking 3; Delivery Extent 3 - Siemens SIMOTICS M-1PH8 Instructions De Service

Service Instructions NFF
Electromagnetic Double Face Spring – Applied Brake
3.4
All parts are made of stainless material or are provided with a surface protection by gas
nitrocarburizing. In addition they are prined with a zinc phosphate painting.
Bore and keyway of the driving hub (15) are supplied greased.
Should it be intended to stock the brake in - process, another protection against corrosion has
to be provided. Please consult our after - sales service (address given in chapter 10.3).
3.5
On receipt check the consignment for completeness (see packing list).
Possible damage during transportation and/or missing parts must be advised immediately and
in writing.
SIMOTICS M-1PH8 1PH818., 1PH822., 1PH828.
Instructions de service 02/2015
In - process stocking
Delivery extent
Stromag Dessau
IP 66
6
Documents complémentaires
D.2 Instructions de service Frein d'arrêt
safety in motion
01.06.2009
135