Hazards Caused By Vibrations; Additional Safety Instructions - Parkside PDSS 16 A1 Traduction Des Instructions D'origine

Hazards caused by vibrations

■ Vibrations can damage the nerves and cause
malfunctions to the blood circulation in the
hands and arms .
■ Wear warm clothing when working in a cold
environment and keep your hands warm and
dry .
■ If you notice that the skin of your fingers or
hands is becoming numb, tingles, hurts or shows
white discolouration, stop working with the
compressed air tool and consult a doctor .
■ The compressed air tool is to be operated and
maintained in accordance with the recommen-
dations contained in this manual to reduce any
unnecessary increase of the vibrations .
■ Consumables and the tool should be selected,
maintained and replaced in accordance with
the recommendations in this guide in order to
avoid unnecessary increase of oscillations .
■ To support the weight of the compressed air
tool, use a stand, clamp or a balancing unit
wherever possible .
■ Hold the compressed air tool securely but not
too firmly while maintaining the necessary
hand-reaction force, as the vibration risk gener-
ally increases the harder the machine is held .
■ An inadequately mounted or damaged acces-
sory tool can lead to excessive vibrations .
PDSS 16 A1
All manuals and user guides at all-guides.com

Additional safety instructions

■ Compressed air can cause serious injury .
■ When the compressed air tool is not in use, the
air supply must always be shut off and the air
hose depressurised . The compressed air tool
must be disconnected from the compressed air
supply before replacing accessories or when
conducting repair work .
■ Never aim the airflow at yourself or anyone
else .
■ Thrashing hoses can cause serious injury . There-
fore, always check whether the hoses and their
fixings are undamaged and have not come
loose .
■ If universal rotary joints (claw couplings) are
used, locking pins must be inserted and Whip-
check hose restraints must be used to provide
protection in the case of a failure of the con-
nection between the hose and the compressed
air tool .
■ Ensure that the maximum permissible pressure
on the compressed air tool is not exceeded .
■ Never carry compressed air tools by the hose .
■ If you are operating the compressed air tool
with a tool holder, ensure that it is securely
fastened . Loss of control can lead to injuries .
GB │ IE │ 19 ■