Videotec ULISSE MAXI Manuel D'instructions page 19

7.3 Housing board description
BOARD DESCRIPTION
Connector/Terminal Function
CN1 Not used
CN2 Motorised lens motor control
connector
CN3 Motorised lens potentiometer
connector
CN6 Not used
CN7 Camera power supply, additional lines
DIP1 Select the lens power supply voltage
Tab. 1
CN3
CN2
CN1
DIP1
Fig. 15
MNVCUPTMAXIR_2104_EN
7.3.1 Connection of the camera and
motorised lens
All connections illustrated below should
be made only and exclusively by expert
installers who should comply with all the
wiring and power supply specifications for
the devices.
The electronics board is designed to control cameras
with motorised lenses, which may or may not have
potentiometers to control the position reached.
Before making the connections make sure
that the voltages supplied by the board fall
within the limits allowed for the apparatus.
CONNECTOR FOR CAMERA/MOTORISED LENSES
Voltage
+12V
+5V
CN6
From 6Vdc up to
15Vdc (adjustable)
CN7
Tab. 2
To power the camera perform the connections as
shown in figure.
+12V GND
Fig. 16 CN7.
Current Description
800mA max Camera power
supply
15mA max Lens potentiometer
power supply
200mA max (Focus Lens motor power
+ Zoom + Iris) supply
+12V
GND
A
B
F1
F2
17