Videotec ULISSE MAXI Manuel D'instructions page 14

6 Preparing the product for
use
Any change that is not expressly approved
by the manufacturer will invalidate the
guarantee.
The unit must not be dismantled or
tampered with. The only exceptions
are those concerning the assembly and
maintenance operations stipulated in this
manual.
6.1 Safety precautions before use
The appliance includes moving parts. Make
sure that the unit is positioned where it
is inaccessible under normal operating
conditions. Attach the warning label
supplied with the appliance, placing it near
the unit so that it can be seen easily.
Fig. 4
6.2 Unpacking
When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
When returning a faulty product we recommend
using the original packaging for shipping.
Keep the packaging in case you need to send the
product for repairs.
Unpack the sunshield of the device, taking
care not to damage the housing.
12
6.3 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Positioning unit
• Power supply base
• Accessories package:
• Serial adaptor
• Serial extension cable
• Allen wrenches
• Spacers
• Spacers (not available in the version with
integrated camera)
• Label
• Cable ties
• Silicone sheath
• Reduction gaskets for cable glands
• Instruction manual
• Attachment plate for desiccant bag
• Desiccant bag
• Bolts and screws
• Counterweights package:
• Bracket for attachment of LED illuminators
(available in the versions with LED illuminators)
• Counterweights
• Counterweights brackets
• Sunshield
6.4 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
MNVCUPTMAXIR_2104_EN