Two Touch Memory Dialing - Esse-ti FlyViewOperator Mode D'emploi Pour L'utilisateur

Two touch memory dialing

You can store and recall up to 10 two touch telephone numbers (up to 16 digits
each).
Storing Telephone Numbers into Memory
Be sure that the phone is in standby mode.
Dial the phone number you want to store.
Press the "STORE" button.
Press a memory location (addresses: 0~9) where you want to store the
number.
To store more phone numbers or modify existing numbers in memory,
repeat previous steps.
Note: The maximum number of digits that can be stored for each
phone number is 16 digits. If stored numbers are longer than
16 digits, only the first 16 digits will be stored into the
selected memory location.
Review a stored telephone number
Press the "RECALL" key and press the memory location (0~9 button) on
the keypad for the number you have stored.
The stored number will be showed.
Dialing a Number from Memory
Pick up the handset or press SPEAKER to off-hook the unit.
Press the "RECALL" button.
Press the memory location (0~9 button) on the keypad for the number
you have stored. The stored number will be dialed automatically.
Or
Press the "RECALL" button.
Press the memory location (0~9 button) on the keypad for the number
you have stored.
Press the "REDIAL" button.
TELEPHONE OPERATION 81