Last Number Redial; Recall On Busy; Pause - Esse-ti FlyViewOperator Mode D'emploi Pour L'utilisateur

or
Press the "SPEAKER" key to go back to the normal conversation.
he call is cleared if you press the HOLD key
T

Last number redial

The last number redial feature may be used to dial the last number called (up to
48 digits).
Press the "REDIAL" button.
or
Pick up the handset or press the SPEAKER button on the base unit.
Listen for a dial tone.
Press the "REDIAL" button. The unit will automatically redial the last
phone number you called.

Recall on busy

In handsfree mode, if the called number is busy, you can use the recall function.
Press "SPEAKER" key and dial the desired phone number.
If you hear the busy tone press "REDIAL" key.
The telephone will keep on calling the number until it is free (max. 32
attempts).
To interrupt the recall cycle:
Press any key.

Pause

In some cases, such as PABX or long distance service, a pause may be needed
in the dialing sequence. Pressing the PAUSE button inserts a 3.6 seconds delay
between dialed numbers. Pauses may be programmed into the memory. Each
3.6 seconds pause occupies one digit of the available 16 digits per memory
location.
80
Warning!
when the call is on hold.
TELEPHONE OPERATION