Pause; Two Touch Memory Dialing - Esse-ti Fly View Operator Mode D'emploi Pour L'utilisateur

32 digits).
Pick up the handset or press the SPEAKER button on the base unit.
Listen for a dial tone.
Press the "REDIAL" button. The unit will automatically redial the last
phone number you called.

Pause

In some cases, such as PABX or long distance service, a pause may be needed
in the dialing sequence. Pressing the PAUSE button inserts a 3.6 seconds delay
between dialed numbers. Pauses may be programmed into the memory. Each
3.6 seconds pause occupies one digit of the available 16 digits per memory
location.

Two touch memory dialing

You can store and recall up to 12 two touch telephone numbers (up to 16 digits
each).
Storing Telephone Numbers into Memory
1. Pick up the handset or press SPEAKER to off-hook the unit.
2. Press the "SET/STORE" button.
3. Dial the phone number you want to store.
4. Press the "SET/STORE" button again.
5. Press a memory location(12 addresses: 0~9, * and # button) where you
want to store the number.
6. To store more phone numbers or modify existing numbers in memory,
repeat steps 1-5.
Note: The maximum number of digits that can be stored for each
phone number is 16 digits. If stored numbers are longer than
16 digits, only the first 16 digits will be stored into the
selected memory location.
Dialing a Number from Memory
Pick up the handset or press SPEAKER to off-hook the unit.
Press the "RECALL" button.
100 TELEPHONE OPERATION