Set Area Code; Set Flash Time - Esse-ti Fly View Operator Mode D'emploi Pour L'utilisateur

Press " SET/STORE" key, " set 1 DATE " glints.
Press "SET/STORE" again to confirm. "20??" is displayed.
Press "UP" or "DOWN" keys to set "Year"
Press "SET/STORE" key again. "Month" glints.
Press "UP" or "DOWN" keys to set "Month".
To set Date, Hour and Minute in the same way.
This also can be made from the keypad. For example, if you want to
input "May 1st, 2001, at 23:59", just key-in: "0105012359".

Set area code

After the "Data and time" programmation "set 2 CODE" on the display for ten
seconds is displayed. In case you do not push any key within these ten seconds,
you have to push again the " SET/STORE" key and the "UP" or "DOWN" ones
till "set 2 CODE" is displayed.
Press "SET/STORE" key. "Code 1----" appears indicating that the first
area code can be set now.
Press "SET/STORE" key. The first "-"glints.
To key in the area code, ie. 0755

Set flash time

This programming is used to set the flash time: the phone sends a line
disengagement impulse to the telephone switch when the FLASH key is
pressed to put the call on hold. The FLASH time indicates the impulse duration
and must be set according to the telephone switch features. In general, the flash
time default value (100 mx) does not need to be changed and the programming
illustrated below is not required.
After the "Area code" programmation "SET 3 FLASH" on the display for ten
seconds is displayed. In case you do not push any key within these ten seconds,
you have to push again the " SET/STORE" key and the "UP" or "DOWN" ones
till "SET 3 FLASH" is displayed.
Press "SET/STORE" key to display "FLASH X YYY".
Press "UP" or "DOWN" keys to select the flash time:
0
INSTALLATION
1000 ms
93