Set Area Code - Esse-ti ST 400 D Mode D'emploi Pour L'utilisateur

Press
Press
Press
Set Date, Hour and Minute in the same way.
Note: by factory is active the automatic synchronization of date and
hour (See: "Automatic synchronization of date and hour"
pag. 59)

Set area code

After the "Data and time" programming "SET 2 CODE" on the display for ten
seconds is displayed. In case you do not push any key within these ten seconds,
you have to push again the
CODE" is displayed.
Press
now.
You can insert up to 10 area codes in the positions 0~9.
Press
or keys to choose another position and press
The first "-" glints.
Key in the area code, i.e. 0755, using
With this program, when you call a number from the list of incoming calls with
the ,
present in the number.
Example:
07551234567.
During recall the telephone dials 1234567 only.
INSTALLATION
or keys to set the year.
key again. The month starts flashing.
or keys to set the month.
key. "Code 0----" appears indicating that area code can be set
key to program the area code in the position 0 or press
and keys, the phone doesn't dial the local area code if it is
local area code: 0755 and incoming call number:
key and the
or
or ones till "SET 2
key to confirm.
keys.
57