Telephone General Programming; Set Date And Time - Esse-ti ST 400 D Mode D'emploi Pour L'utilisateur

T
ELEPHONE GENERAL PROGRAMMING
Be sure that the phone is in standby mode.
Press
Press
(from 1 to 6):
1
2
3
4
5
6
Press
The display shows the current setting and the modifiable parameter
starts flashing. Use
options or enter a value (enter a value for each flashing digit). To set
more than one parameter, press
The next parameter starts flashing.
Press
Note: when the setting is completed, the next parameter appears on
the display. The programming mode is exited if no key is
pressed within 10 seconds.

Set date and time

Be sure that the phone is in standby mode.
Press
Press
56
key to access the programming mode.
or keys to scroll through the six programming modes
Date and time "date"
Area code "code"
Line engagement code "pcode"
Brightness "lcd"
Flash time "flash"
Baby call function "babycall"
key to set the selected programming mode.
or
to exit the programming mode.
key, "SET 1 DATE" is displayed.
again to confirm. The year starts flashing.
keys to scroll through the different
to save the current parameter.
INSTALLATION