Set Area Code; Set Flash Time - Esse-ti FlyView Manuel D'installation Et Utilisation

Press "UP" or "DOWN" keys to set "Year"
Press "SET/STORE" key again. "Month" glints.
Press "UP" or "DOWN" keys to set "Month".
To set Date, Hour and Minute in the same way.
This also can be made from the keypad. For example, if you want to
input "May 1st, 2001, at 23:59", just key-in: "0105012359".

Set Area Code

After the "Data and time" programmation "set 2 CODE" on the display for ten
seconds is displayed. In case you do not push any key within these ten seconds,
you have to push again the " SET/STORE" key and the "UP" or "DOWN" ones
till "set 2 CODE" is displayed.
Press "SET/STORE" key. "Code 1----" appears indicating that the first
area code can be set now.
Press "SET/STORE" key. The first "-"glints.
To key in the area code, ie. 0755

Set Flash Time

Pressing the FLASH button (while the phone line is in use) momentarily hangs
up the phone to access custom calling features such as Call Waiting, Three-
Way Calling, ...
After the "Area code" programmation "SET 3 FLASH" on the display for ten
seconds is displayed. In case you do not push any key within these ten seconds,
you have to push again the " SET/STORE" key and the "UP" or "DOWN" ones
till "SET 3 FLASH" is displayed.
Press "SET/STORE" key to display "FLASH X YYY".
Press "UP" or "DOWN" keys to select the flash time:
0
1
2
3
Confirm it by pressing the "SET/STORE" key again.
DESCRIPTION
1000 ms
100 ms
300 ms
600 ms.
69