One Touch Memory Dialing - Esse-ti FlyView Manuel D'installation Et Utilisation

Note: The maximum number of digits that can be stored for each
phone number is 16 digits. If stored numbers are longer than
16 digits, only the first 16 digits will be stored into the
selected memory location.
Dialing a Number from Memory
Pick up the handset or press SPEAKER to off-hook the unit.
Press the "RECALL" button.
Press the memory location (0~9, * and # button) on the keypad for the
number you have stored. The stored number will be dialed
automatically.
Changing Stored Phone Numbers
Follow the steps described in "Storing Telephone Numbers into
Memory."
The new phone number will automatically replace the previous one.

One Touch Memory Dialing

You can store and recall only one direct access memory M1 (up to 32 digits).
Storing Telephone Numbers into M1
1. Pick up the handset or press SPEAKER to off-hook the unit.
2. Press the "SET/STORE" button.
3. Dial the phone number you want to store.
4. Press the memory location button M1.
Dialing a Number from M1
In the standby mode press M1 button. If before pressing the M1 button
some digits have been dialed, the numbers stored in this memory will be
sent to the line first.
Changing Stored Phone Numbers
Follow the steps described in "Storing Telephone Numbers into M1."
The new phone number will automatically replace the previous one.
74 DESCRIPTION