Storing Vip Numbers; Two Touch Memory Dialing - Esse-ti FlyView Manuel D'installation Et Utilisation

in the dialing sequence. Pressing the PAUSE button inserts a 3.6 seconds delay
between dialed numbers. Pauses may be programmed into the memory. Each
3.6 seconds pause occupies one digit of the available 16 digits per memory
location.

Storing VIP numbers.

If you do not want to be disturbed by the incoming calls, the telephone ringer is
off and only the relative led lights (see "Set Ringer on/off"). Nevertheless the
ringer is off, if the one is coming is a VIP number the ringer will play as well.
On incoming call with CLI displayed;
Press the key "VIP".
The VIP number is now displayed with a lock.
or
On the stored numbers of incoming and outgoing calls (after having reload the
number from memory, as explained in the relatives user's manual paragraphs,
and so displayed).
Press the key "VIP".
The VIP number is now displayed with a lock.
A displayed VIP number become NOT VIP just pressing the key "VIP" again.

Two Touch Memory Dialing

You can store and recall up to 12 two touch telephone numbers (up to 16 digits
each).
Storing Telephone Numbers into Memory
1. Pick up the handset or press SPEAKER to off-hook the unit.
2. Press the "SET/STORE" button.
3. Dial the phone number you want to store.
4. Press the "SET/STORE" button again.
5. Press a memory location(12 addresses: 0~9, * and # button) where you
want to store the number.
6. To store more phone numbers or modify existing numbers in memory,
repeat steps 1-5.
DESCRIPTION 73