Accessing The Provider's Services; Caller Id Operation - Esse-ti FlyView Manuel D'installation Et Utilisation

according to the PABX requirements. FlyView
Flash time can be programmed at 1000ms (default),
PABX user manual for the required Flash time.
Esse-ti PABXs all have 100ms Flash time. It is
therefore necessary to program FlyView Flash time
paragraph "Set Flash time" for this programming
Note: If FlyView's Flash time is longer than PABX's the call will be
cleared.

Accessing the provider's services

When FlyView is directly connected to the trunk line (not to a PABX), FLASH
key allows you to access the telephone network provider's services (Call
Waiting, Conference...). Please ask the provider for a list of the available
services.

Caller ID Operation

First you have to apply for the service of caller ID from the local PTT.
There are three lines in the LCD.
The first line indicates:
Number of new calls, in the right hand of the line.
The arriving date and time of the last call
The second line indicates:
New call icon
Repeated call icon
VIP
Day
The function of the third line:
The number is displayed when there is a new call.
The outgoing number is displayed when a phone number is dialed.
Year is displayed when the phone is on-hooked.
76
You have to program the FlyView Flash time
600ms, 300ms, and 100ms. Please refer to the
from 1000ms (default) to 100ms. Please read
Attention:
DESCRIPTION