Redial The Last Dialed Number; Lcd Brightness - Esse-ti ST100L Mode D'emploi

Redial the last dialed number

The last dialed number can be redialed by pressing the RD button.
Lift the handset.
Wait for the dial tone.
Press the RD button. The unit will redial the last dialled number
automatically.
HOLD key
When ST100-L is connected directly to the trunk line you have to press the
HOLD key in order to put a call on hold. When, instead, ST100-L is connected
to a PABX you have to press the FLASH key.
Initial situation: conversation in progress over the trunk line.
Press the HOLD key to put the trunk line on hold.
The outside line will still be retained just listening to music, so the other party
cannot hear your conversation. You may replace the handset.
If the handset is not replaced press HOLD key, otherwise pick up the
handset, to go back to normal conversation.
PAUSE key
A pause (3,6 s) can be inserted into the sequence of digits (or dial string) by
using the Pause key.
Press the PAUSE key.

LCD brightness

The BRT key allows you to choose the LCD brightness (5 levels):
Lift the handset up.
Press the BRT key repeatedly.