Esse-ti ST100L Mode D'emploi page 7

To receive a call
Lift the handset up.
Start the conversation.
Normal dialing
Lift the handset and wait for the dial tone.
Dial the called party number.
Note: the telephone set can only be used in tone dialing mode
(DTMF).
Ringer switch
For ringer switch :
Set the HI/LO/OFF switch to OFF (disable), LO (low), HI (high).
MUTE key
It allows you to hear the other party without being heard.
Press the MUTE button and keep it pressed.
Release the button to return to the conversation.
Flash (100 ms)
By pressing the FLASH button while the line is engaged, you can access
various services offered by your service provider.
When ST100-L is used in conjunction with a PABX, your unit makes it easy to
transfer calls.
Example: Call Transfer
Initial situation: Conversation in progress over the external line.
Press FLASH to place the external line on hold.
Dial the desired extension number.
When the called party answers, announce the call.
Hang down the handset to transfer the external call to the desired
extension.
ENGLISH