Temperature Regulation; Switching Off The Fridge - Electrolux IK2550BNR Notice D'utilisation

64 www.electrolux.com
It is possible to change predefined sound
of buttons to a loudly one by pressing
together Mode and temperature colder
3.2 Display
A B
Off
min
3.3 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off. The temperature
indicators show the set default
temperature.
The alarm buzzer could
operate after few seconds.
To reset the alarm refer to
"High temperature alarm".
To select a different set temperature refer
to "Temperature regulation".
If "dEMo" appears on the display, refer to
"Troubleshooting" .
3.4 Switching off
1. Press the appliance ON/OFF for 5
seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.

3.5 Temperature regulation

Set the temperature of the appliance by
pressing the temperature regulators.
Default set temperature:
• +5°C for the fridge
• -18°C for the freezer
The temperature indicators show the set
temperature.
C D E F
L K J I
button for some seconds. Change is
reversible.
A) Fridge compartment indicator
G
B) Timer indicator
/Temperature indicator
C) ON/OFF indicator
D) Shopping function
E) Holiday function
H
F) ActionFreeze function
G) Temperature indicator
H) Freezer compartment indicator
I) Alarm indicator
J) ChildLock function
K) DrinksChill function
L) FreeStore function
3.6 Switching on the fridge
To switch on the fridge it is enough to
press the fridge temperature regulator. To
switch on the fridge in the other way:
1. Press Mode until the corresponding
icon appears.
The Fridge OFF indicator flashes.
2. Press OK to confirm.
The fridge OFF indicator goes off.

3.7 Switching off the fridge

1. Press Mode until the corresponding
icon appears.
The fridge OFF indicator and the fridge
compartment indicator flash.
The fridge temperature indicator shows
dashes.
2. Press OK to confirm.
The fridge OFF indicator is shown.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
To select a different set
temperature refer to
"Temperature regulation".