Switching Off; Temperature Regulation; Drinkschill Function; Childlock Function - Electrolux IK2240CR Notice D'utilisation

52 www.electrolux.com
3.2 Display
A
Off
min
3.3 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off.
The temperature indicators show the set
default temperature.
To select a different set temperature refer
to "Temperature regulation".
If "dEMo" appears on the display, refer to
"What to do if..." chapter.

3.4 Switching off

1. Press the appliance ON/OFF button
for 5 seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.

3.5 Temperature regulation

Set the temperature of the appliance by
pressing the temperature regulator.
Default set temperature:
• +5°C for the fridge.
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.

3.6 DrinksChill function

The DrinksChill function is to be used to
set an acoustic alarm at the preferred
time, useful for example when a recipe
requires to cool down a mixture for a
certain period of time, or when a reminder
B C DE F G
A) Timer indicator
H
B) Fridge off indicator
C) Shopping function
D) Temperature indicator
E) Holiday function
F) Alarm indicator
G) ChildLock function
H) DrinksChill function
is needed in order not to forget the bottles
placed in the freezer for fast cooling.
1. Press Mode until the corresponding
icon appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
2. Press the Timer regulator to change
the Timer set value from 1 to 90
minutes.
3. Press OK to confirm.
The DrinksChill indicator is shown.
The Timer start to flash (min).
At the end of the countdown the
DrinksChill indicator flashes and an audible
alarm sounds that indicates that any
drinks contained in the freezer
compartment should be removed and it is
necessary to press OK to switch off the
sound and terminate the function.
To switch off the function repeat the
procedure until the DrinksChill goes off.

3.7 ChildLock function

Activate the ChildLock function to lock the
buttons from unintentional operation.
1. Press Mode until the corresponding
icon appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock function,
repeat the procedure until the ChildLock
indicator goes off.
It is possible to change the
time during the countdown
and at the end by pressing
the Temperature colder
button and the Temperature
warmer button.