Model Description; All Models; Model Designation - Hatco Flav-R-Savor FSD-1 Manuel D'installation Et D'utilisation

Masquer les pouces Voir aussi pour Flav-R-Savor FSD-1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MODEL DESCRIPTION

All Models

Flav-R-Savor
Humidified Holding and Display Cabinets come
®
in either brushed aluminum or painted Designer colors. All units
feature a digital temperature controller, air heating system,
LED lights, tempered glass side panels, and a tempered glass
door(s). Units can be configured with or without a humidity
system with low water control protection. The standard access
door can be hinged left or right. The cabinet interior top and
bottom is made of easy-to-clean stainless steel. All available
display racks are nickel-plated except the pretzel tree display
rack, which is stainless steel. There are revolving and stationary
rack options that hold three to seven display trays.
FSD-1 and FSDT-1 Models
The FSD-1 is a standard single door model with a revolving
display motor. It has revolving and stationary rack options that
hold three to five display trays.
The FSDT-1 is a single door model with a revolving display
motor like the FSD-1, but is 5" (127 mm) taller.
On each model, the rotating rack stops automatically when the
door is opened. For details on different rack options, refer to the
OPTIONS AND ACCESSORIES section.
FSD-1 Model
NOTE: Models FSD-1 and FSDT-1 cannot be converted to
models FSD-2/FSDT-2 or FSD-2X/FSDT-2X.

MODEL DESIGNATION

No Character = Standard Height
F S D T - x X
Flav-R-Savor
Display Cabinet
T = Tall
FSD-2 and FSDT-2 Models
The FSD-2 and FSDT-2 are the same as models FSD-1 and
FSDT-1, but have an additional door on the opposite side of the
controls for pass-through convenience.
FSD-1X and FSDT-1X Models
The FSD-1X is a single door model with a stationary rack that
holds three display trays.
The FSDT-1X is a single door model with a stationary rack that
holds four display trays, but is 5" (127 mm) taller.
For details on different rack options, refer to the OPTIONS
AND ACCESSORIES section.
NOTE: Models FSD-1X and FSDT-1X cannot be converted to
models FSD-1/FSDT-1, FSD-2/FSDT-2, or FSD-2X/
FSDT-2X.
Models FSD-2X and FSDT-2X
The FSD-2X and FSDT-2X are the same as models
FSD-1X and FSDT-1X, but have an additional door on the
opposite side of the controls for pass-through convenience.
NOTE: Models FSD-2X and FSDT-2X cannot be converted to
models FSD-2/FSDT-2.
No Character = w/ Rack Motor
X = No Rack Motor
1 = One Door
2 = Two Doors
4
English
FSDT-1X Model
Form No. FSDM-0119

Publicité

Chapitres

Table des Matières
loading

Table des Matières