Hatco Flav-R-Savor FSD-1 Manuel D'installation Et D'utilisation page 17

English
Merchandising Display Sign Holders
Merchandising Display Sign Holders are available in heights of
3-1/4" (83 mm) and 7-1/2" (191 mm). The sign holders include a
metal holder and an acrylic window. Up to three sign holders can
be installed on a unit, one per side (excluding the control side).
1. Remove the existing screws securing the top cover in
place, position the sign holder over the screw holes, and
reinstall the screws.
2. Place the printed sign in the holder and slide the protective
acrylic window over the sign.
3-1/4" (83 mm)
Sign Holder
Merchandising Display Sign Holder
(3-1/2" [83 mm] height shown)
Mechanical Thermostat Control Panel
The Mechanical Thermostat Control Panel is an alternative
to the digital control panel and features separate dials for
controlling temperature and humidity. This is a factory-installed
option and is not available for retrofit.
HUMIDITY CYCLE Indicator
Water Reservoir
Fill Cup
Form No. FSDM-0119
Screw
7-1/2" (191 mm)
Sign Holder
LOW WATER
Indicator
Mechanical Thermostat Control Panel
17
OPTIONS AND ACCESSORIES
HUMIDITY
Control
TEMPERATURE
Control
POWER ON/OFF
(I/O) Switch
CABINET
TEMPERATURE
Display