Rack Max 650 Electrical Connection - GIESSE RACK MAX 650 Manuel D'utilisation Et D'installation

IMPORTANT FOR PRODUCT SAFETY:
in motors with power supply voltage 24V
must be insulated.

RACK MAX 650 electrical connection

11.1.
For the wiring, follow the diagrams below.
F N
1 2
Connection of 2 or more SYNCHRONIZED RACK MAX 650
11.2.
24 V ac
The cable supplied with the actuator in the
24V version has a length of 2 m and is
calculated in accordance
regulations.
The electrical connection between the
communication wires must be made with a
screw-type connector (the connector is
provided). A firm, secure connection with a
good electrical contact (copper on copper) is
essential to prevent
communications. The communication wires
must not be more than 10 meters long.
For the wiring, follow the diagram aside:
1 2
110/2 0V
with safety
interference
, if not used, the Green wire "3"
1
on
ROSSO BLACK
RED BLACK
ROT SCHWARZ
ROUGE NOIRE
ROJO NEGRO
46
1
2
2
24V
VERDE FILO DI COMUNICAZIONE
GREEN CONTROL WIRE
GRUN LEITUNGSÜBER-WACHUNG
VERT CABLE DE CONTRÔLE
VERDE CABLE DE CONTROL