Diagnostics - Lenze L-force EtherCAT EMF2192IB Instructions De Montage

8

Diagnostics

8 Diagnostics
The LEDs on the front are provided to the communication module for the purpose of fault
diagnostics.
LED
Pos. Colour Status
0
green blinking
on
1
green
off
blinking
on
2
green The EtherCAT state machine controls the two−colored LED (red/green):
l
l
off
blinking
on
red on
3
red
green
46
Description
l
The EtherCAT connection has been established.
l
Data communication of the EtherCAT connection is active.
The communication module is not supplied with voltage.
The communication module is supplied with voltage, but has no
connection to the standard device (standard device is switched off, in
the initialisation phase, or not available.)
The communication module is supplied with voltage and is connected
to the standard device.
Status messages are shown in green.
Error messages are shown in red.
The communication module is not active on the fieldbus or is in the
"Init" status.
"Pre−operational" or "Safe−operational" state active.
The communication module is in the "Operational" status.
An error has occurred in the communication module.
The red and green drive LED indicates the operating status of the
standard device (see operating instructions of the standard device).
l
EDK2192IB DE / EN / FR 2.0