Topcom Fidelity SMS Manuel D'utilisateur page 11

All manuals and user guides at all-guides.com
HL_FidelitySMS.book Page 11 Monday, August 4, 2003 3:38 PM
a. Setting the Service Center number for outgoing SMS.
• Press the Menu button .
• Use the scroll switch to select the 'Setting'.
• Press OK
• Use the scroll switch to select 'Nr. SMS Out'
• Press OK
• Enter the SC number received from the telephone operator
Wrong entered digits can be erased by pressing the delete key
• Press OK to confirm
• Press the Escape button twice to leave the menu.
b. Setting the Service Center number for incomming SMS.
• Press the Menu button .
• Use the scroll switch to select the 'Setting'.
• Press OK
• Use the scroll switch to select 'Nr. SMS In'
• Press OK
• Enter the SC number received from the telephone operator
Wrong entered digits can be erased by pressing the delete key
• Press OK to confirm
• Press the Escape button twice to leave the menu.
c. Setting the Terminal Number for Incomming SMS.
• Press the Menu button .
• Use the scroll switch to select the 'Setting'.
• Press OK
• Use the scroll switch to select 'Terminal Number'
• Press OK
• Use the scroll switch to select the desired Terminal number or enter the number with the Keypad. (Select '-' by
pressing the delete key , when the terminal number is not supported by your network operator)
• Press OK to confirm
• Press the Escape button twice to leave the menu.
d. Setting the Deliver Mode Identifier for Outgoing SMS.
• Press the Menu button .
• Use the scroll switch to select the 'Setting'.
• Press OK
• Use the scroll switch to select 'DMI setting'
• Press OK
• Use the scroll switch to select the desired Terminal number or enter the number with the Keypad. (Select '-' by
pressing the delete key , when the Delivery Mode Identifier is not supported by your network operator)
• Press OK to confirm
• Press the Escape button twice to leave the menu.
9.2.2 Sending Short Messages
• Press the SMS button
• Use the scroll switch to select 'Write Message'.
• Press OK
• Enter the Short Message by using the Alphanumerical keypad (see 7.1)
• Press OK
• Use the scroll switch to select the 'Send SMS?'.
• Press OK
• Enter the desired telephone number.
In case you want to reach a specific Terminal Number, you have to add the Terminal number of the
receiver after the telephone number (Telephonenumber + Terminal number).
• Press OK, the display shows ' Send?'
• Press OK to confirm. Wait until the display indicates that the message has been sended.
You can leave the menu at any time by pressing the Escape button
Topcom Fidelity SMS
.
.
.
11