Making A Phone Call; Last Number Redial; Deactivating The Microphone (Mute); General Information - Topcom Fidelity SMS Manuel D'utilisateur

All manuals and user guides at all-guides.com
FidelitySMS_EN.fm Page 7 Tuesday, August 5, 2003 10:30 AM

5 MAKING A PHONE CALL

There are 2 ways to make a phone call :
1. Enter the telephone number. If needed, you can erase the last digits by pressing the Erase button
Pick up the handset or press the Handsfree button
automatically.
2. Pick up the receiver or press the Handsfree button
Note: The call duration timer is shown on the 3rd line of the display [h:mm:ss].

5.1 Last number redial

The Fidelity SMS saves the 5 last dialled telephone numbers in the memory with indication of the call duration, the date
and the time. Press the Redial button
the display, there are two ways to call back :
1. Press the Handsfree button . The desired number will be dialled automatically in handsfree.
2. Pick up the receiver. The number will be dialled automatically after 3 seconds.
Note: The Redial button can also be used as a Pause button while entering a telephone number !
The letter 'P' appears on the display on the location where you have added a pause of 3 sec.

5.2 Deactivating the microphone (mute)

It is possible to deactivate the microphone during a conversation by pressing the Erase/Mute button
talk freely without the caller hearing you. The 'Mute' icon
deactivated. Press the Erase/Mute button
5.3 Ringer volume
When you receive a phone call, the unit will ring. The ring volume can be adjusted by means of the Ring Volume switch
at the back of the phone (Hi- , Lo-
5.4 Flash Key
Press the Flash button (R) to use certain services as 'Call Waiting' (if this service is provided by your telephone
company); or to transfer phone calls when you are using a telephone exchange (PABX).
6 CALLER ID

6.1 General information

When you have a subscription to the Caller ID service, the caller's phone number and name (when supported by the
network) will appear on the display. If you saved the telephone number with the name in the Phone Book or in the direct
memory, the programmed name will be shown on the display (name tagging function).
During an incoming call, the following information can appear on the display:
NUMBER UNKNOWN
You have a subscription to the Caller ID service but the caller's number is not available (for ex. international calls).
NUMBER BLOCKED
You have a subscription to the Caller ID service but the caller's number is a private number.
6.2 Call list
The Fidelity SMS has a Call List where 40 incoming telephone numbers with name can be stored. The phone numbers
you have received more than once, will not be stored, but the repeat indicator
number is saved in the Call List with indication of date and time.
In standby mode the number of new received calls is shown on the display. The new message LED will blink until you
have checked all New messages.
Topcom Fidelity SMS
. After 3 seconds, the phone number will be dialled
. Enter the telephone number.
to scroll through the Redial memory. When the desired number appears on
appears on the display when the microphone is
again if you want to resume your conversation.
, Off- ).
.
. You can now
will be displayed. Every incoming
7