Ingersoll Rand UP 20HP Manuel De L'opérateur page 4

INTRODUCTION
This manual is an integral part of the dryer you bought, and must remain with the machine even if this will be resold.
It is highly recommended that the qualified*personnel for installation maintenance and/or control will fully comply with the
contents of this manual and the prevention and safety rules in force in the country where the system will be used. In this way, not
only the usage of the machine will be rational, but also the service will result cost effective.
In case your dryer will present any kind of problem, please contact your local authorized Ingersoll Rand distributor.
Please note that, when necessary, the use of original spare parts will ensure efficiency and long duration to your dryer.
Due to the continuous technological evolution, Ingersoll Rand reserves the right to modify the specifications contained in this
manual without giving previous notice.
SYMBOLS AND LABELS USED IN THE MANUAL AND ON THE DRYER
Read the Operators manual before attempt to start
up the machine and to perform any service
operation on the dryer.
Pay particular attention to the indications preceded
by these symbols.
Installation, maintenance, and/or control operations
preceded< by these symbols must be performed
exclusively by qualified personnel*.
Condensate drain point.
Pay particular attention to the risk of moving parts
* Qualified personnel must be trained and certified in accordance with local laws and regulations.
WARRANTY
The Company warrants that the equipment manufactured by it and delivered hereunder will be free of defects in material and
workmanship for a period of twelve months from the date of placing the Equipment in operation or eighteen months from the date
of shipment from the factory, whichever shall first occur. The Purchaser shall be obligated to promptly report any failure to conform
to this warranty, in writing to the Company in said period, whereupon the Company shall, at its option, correct such nonconformity,
by suitable repair to such equipment or, furnish a replacement part F.O.B. point of shipment, provided the Purchaser has stored,
installed, maintained and operated such Equipment in accordance with good industry practices and has complied with specific
recommendations of the Company. Accessories or equipment furnished by the Company, but manufactured by others, shall carry
whatever warranty the manufacturers have conveyed to the Company and which can be passed on to the Purchaser. The
Company shall not be liable for any repairs, replacements, or adjustments to the Equipment or any costs of labor performed by
the Purchaser or others without Company's prior written approval.
Cod. 710.0048.20.00 Rev02B – 04.2017
Air entry point
Lifting point.
Attention: Before performing
maintenance operation
machine, do not forget to disconnect
the electric supply, to completely
discharge air pressure, and to refer to
the Operators manual.
- EN -
Pay particular attention to components or systems
under pressure.
Pay particular attention to hot surfaces.
Pay particular attention to the risk of electric shock.
Rotation direction of the fan.
Explosion risk.
any
on this
Air outlet point
Don't lift from this point.
2 - 21