Publicité
Les langues disponibles
Les langues disponibles
Functions
More about setting the functions by GM-Racing programming card
1)
Disconnect the battery connector from ESC
2)
Connect the Signal wire to the programming card.
3)
Connect the battery connect to ESC.
4)
Switching on the ESC.
5)
Press button twice of white dot "O" to program the ESC. (One for main-functions, one
for sub-functions)
6)
Switching off the ESC.
7)
Disconnect the battery plug and signal plug from ESC
8)
Connect the signal wire to receiver throttle control
9)
Done
When the users finished step (4), who will heard 6 tones eeeeee (circumflex), the mean is enter
programming mode.
After 1 rising tone (like e~ ) please choose which one you want to choose. You can see the draw of
the up, the blue back view with describe is main functions, the grey back view with number is sub
functions.
For example:
If you want to choose "80% Brake Strength" 1-6 and "10% Drag Brake" 2-3, please see description
below.
First of all, when you heard 6 tones eeeeee(circumflex) meaning is enter programming mode, after
1 rising tone e~ press the "O"beside grey "1" and "O" beside grey "6", about 1 second you will heard
acknowledge sound 1 long tone and 6 short tones (like e~eeeeee) follow this sound you can heard
1 rising tone e~, after that the user able to selecting next setting "2-3", same as the setting of front
press the "O" beside grey "2" and "O" beside grey "3", about 1 second you will heard acknowledge
sound 2 long tones and 3 short tones (like ee~eee) follow this sound you can heard 1 rising tone e~,
after that the user able to selecting next setting...etc
Caution!!
High power motor systems could be very dangerous. High current could generate heat on wires, bat-
teries, and motors. Always follow the instruction and use proper tools to set up the system within safe
range. Always to racing at a designed course with caution even though this controller is equipped
with safety arming program.
Functions
17
Publicité
