Publicité
Les langues disponibles
Les langues disponibles
Functions
2. Drag Brake
Following by brake strength, the system will enter drag brake. This section offers 7 options to be 0%,
5%, 10%, 15%, 20%, 25% 30% and 35% drag brake. The motor will come up the corresponding
tones as indicator. The following is the indication with graphic reference.
2-1...0% Drag Brake (Factory Default)
2-2...5% Drag Brake
2-3...10% Drag Brake
2-4...15% Drag Brake
2-5...20% Drag Brake
2-6...25% Drag Brake
2-7...30% Drag Brake
2-8...35% Drag Brake
When intend to choose one of above options, simply position the throttle stick from neutral point to
maximum after the indication tone. The next step is to release the throttle stick back to the neutral
point to confirm. If there is no need to enter next set up section, you could simply shut down the
power. The selection was stored into the microprocessor when the throttle stick was in confirmation
position. If there is need to enter throttle sensitivity set up section, simply wait for the next tone.
3.
Throttle Speed
Following by the drag brake, the system will enter throttle speed setting. This section offers 5 options
to be very soft, soft, standard, quick and very quick. The motor will come up the corresponding tones
as indicator. The following is the indication with graphic reference.
3-1...Very Soft Throttle Sensitivity
3-2...Soft throttle Sensitivity
3-3...Standard Throttle Sensitivity (Factory Default)
3-4...Quick Throttle Sensitivity
3-5...Very Quick throttle Sensitivity
When intend to choose one of above options, simply position the throttle stick from neutral point to
maximum after the indication tone. The next step is to release the throttle stick back to the neutral
point to confirm. If there is no need to enter next set up section, you could simply shut down the
power. The selection was stored into the microprocessor when the throttle stick was in confirmation
position. If there is need to enter start mode set up section, simply wait for the next tone.
4.
Start Power
Following by the throttle speed, the system will enter start mode setting. This section offers 5 options.
They were very soft, soft, standard, powerful and very powerful start mode. The motor will come up
the corresponding tones as indicator. The following is the indication with graphic reference.
4-1...Very Soft Start Power (Factory Default)
4-2....Soft Start Power
4-3...Standard Start Power
4-4...Powerful start Power
4-5...Very Powerful Start Power
When intend to choose one of above options, simply position the throttle stick from neutral point to
maximum after the indication tone. The next step is to release the throttle stick back to the neutral
point to confirm. If there is no need to enter next set up section, you could simply shut down the
power. The selection was stored into the microprocessor when the throttle stick was in confirmation
position. If there is need to enter reverse power set up section, simply wait for the next tone.
14
Functions
ee-e
ee-ee
ee-eee
ee-eeee
ee-eeeee
ee-eeeeee
ee-eeeeeee
ee-eeeeeeee
eee-e
eee-ee
eee-eee
eee-eeee
eee-eeeee
eeee-e
eeee-ee
eeee-eee
eeee-eeee
eeee-eeeee
Publicité
