Complete The Installation - Kohler K-3935 Mode D'emploi

Rail
Secure the Sink
Rotate the back clips to engage the countertop. Use a bladed
screwdriver to tighten securely.
Rotate the side clips to engage the bottom of the basin and the
rails. Tighten evenly to finger-tight.
Immediately wipe away any excess sealant from around the sink
edges.
Apply silicone sealant to the ends of the side clip assemblies.
Install caps to the threads of each side clip assembly.

Complete the Installation

Apply a bead of silicone sealant around the apron where it meets
the cabinet.
Install the faucet according to the manufacturer's instructions.
Connect the drain piping.
Run water into the sink and check all connections for leaks.
Kohler Co.
Back Clip
Side Clips
17
Basin
Rail
Cap
1166708-2-B