Kohler K-3935 Mode D'emploi page 5

Using the Compatibility Template
IMPORTANT! The countertop must be flat. This sink will not
install to countertops with integral drip edges.
IMPORTANT! The countertop thickness should not exceed 1-1/2"
(38 mm).
IMPORTANT! The countertop should not overhang the cabinet face
more than 1-1/2" (38 mm).
If your countertop is already installed, use the "Pre-installation,
Sink, Counter, and Cabinet Compatibility Template" to qualify
your installation site.
Position the compatibility template onto the countertop as shown.
The front of the template should rest against the cabinet face (not
the drawer front or door).
Verify the backsplash, counter overhang, and cabinet doors do not
interfere with positioning the template as shown.
With the template in place, verify clearance to open and close the
doors, and ensure that the drawer opening will be covered by the
sink apron.
Kohler Co.
Compatibility
Template
Back Edge
of Sink
Ensure
opening
is covered.
5
Overhang
Clearance
Door
Clearance
1166708-2-B