Horizon Hobby E-flite A-10 Thunderbolt II 64mm Twin EDF Manuel D'utilisation page 6

EN
Model Assembly (Continued)
Wing Installation
1. Align and insert the main wing into the slot in the bottom of the fuselage.
2. Secure the wing into position using the included 4 screws (3x32mm) (A).
3. Disassemble in reverse order.
Pave Penny Pod Installation
1. Apply medium CA to joining surface of the Pave Penny pod.
2. Attach the Pave Penny pod to recess on the right side of the fuselage.
6
A
A-10 64mm Twin EDF