Haussmann N1F-GT-300 Manuel De L'utilisateur page 8

ASSEMBLY
Fig.4
Adjusting the telescopic tube (Fig.5):
1. Slacken the coupling nut
2. Pull the telescopic tube to the desired length
3. Retighten the coupling nut again
Adjusting the angle of cutting head (Fig.6):
1. Press locking lever (8)down and hold
2. Turn the operation handle to the desired position
3. Release locking lever (8)again
WARNING! Never use steel, wire, rope, string, or other materials as cutting line,
which can break off and become a dangerous projectile.
The trimmer must be used outdoors only, at an ambient temperature between
0ºC and 45ºC.
7
Screws
Fig.6
Fig.5
8
!