Panasonic WV-CS570/G Mode D'emploi page 43

CAMERA ID
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$ÄÜÖÆÑÅ
SPACE
POSI RET RESET
CAM1............
3-2 Decide the position of the camera ID with the joy-
stick. Press the MON (ESC) button to fix the posi-
tion, and return to the character editing menu.
Notes:
• When you want the pointer to move to a specific
character in the editing area, select a new char-
acter, and press the CAM (SET) button. This
function allows you to edit or correct a specific
character.
• To enter a blank space into the camera ID, move
the cursor to SPACE, and press the CAM (SET)
button.
• To erase all characters in the editing area, move
the cursor to RESET, and press the CAM (SET)
button.
• The positioning of CAMERA ID stops at the
edges of the screen.
• CAMERA ID moves faster when the joystick is
kept at the right or left for one second or more.
• Move the cursor to RET to return to the SET UP
menu, and press the CAM (SET) button.
CAM1
CAMERA ID
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$ÄÜÖÆÑÅ
SPACE
POSI RET RESET
CAM1............
CAMERA ID
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$ÄÜÖÆÑÅ
SPACE
POSI RET RESET
CAM1............
G Light Control Setting (ALC/MANUAL)
1. Move the cursor to ALC/MANUAL and select ALC or
MANUAL with the joystick. When you select ALC,
set backlight compensation.
CAMERA ID
ALC/MANUAL
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
AF MODE
RET
Note:
The backlight compensation submenu associat-
ed with this menu is described separately and
should be set up after installing the camera at
the site and observing the actual site picture.
2. When MANUAL is selected, quit the setup menu by
pressing the MON (ESC) button. Press the OPEN or
CLOSE button on the controller for iris adjustment.
(1) ALC Mode with BLC ON
1. Press the CAM (SET) button after selecting ALC.
The ALC CONT menu appears.
BLC
MASK SET
LEVEL
RET
2. Move the cursor to the BLC parameter and select
ON.
BLC
LEVEL
RET
3. If you want to adjust the video output level, move the
"I" cursor for LEVEL. Adjust it to the desired level
with the joystick.
4. Move the cursor to RET and press the CAM (SET)
button to return to the CAM SET UP menu.
-43-
** SET UP **
OFF
ALC
AUTO
ON(MID)
OFF
INT
ATW1
OFF
AUTO L
SPECIAL2
** ALC CONT **
BACK LIGHT COMP
OFF
••••|••••
- +
** ALC CONT **
BACK LIGHT COMP
ON
••••|••••
- +