Panasonic WV-CS570/G Mode D'emploi page 37

G Area Title (AREA TITLE)
Up to 8 area titles can be added in specific positions.
1. Select ON (NESW), ON (USER) or OFF with the joy-
stick.
** SPECIAL 1 **
PRIVACY ZONE
PROPO.P/T
AREA TITLE
PATROL
ALARM IN/OUT
CLEANING
EL-ZOOM
PRESET ALM
IMAGE HOLD
TILT ANGLE
RET
ON (NESW): An area title is displayed for indicating
the camera direction: North (N), North-East (NE),
East (E), South-East (SE), South (S), South-West
(SW), West (W) and North-West (NW).
** DIRECTION(NESW) **
PAN/TILT
ZOOM/FOCUS
POSI
RET
ON (USER): A user customized area title appears in
a maximum of 16 characters.
OFF: Area title does not appear.
Factory default setting: OFF
2. Press the CAM (SET) button. A submenu appears
except when OFF is selected.
Settings for ON (NESW)
1. Move the cursor to PUSH SET for PAN/TILT, and
press the CAM (SET) button. PAN/TILT is highlight-
ed and "U TILT D/L PAN R" appears.
** DIRECTION(NESW) **
PAN/TILT
ZOOM/FOCUS
POSI
U TILT D/L PAN R
RET
2. Turn the camera north with the joystick, and press
the CAM (SET) button. The origin of the direction
(North) is set.
Note:
Area titles are highlighted until the origin is set.
OFF
ON
ON(USER)
STOP
OFF
ON
OFF
OFF
0°
→PUSH SET
→PUSH SET
→PUSH SET
+
N
→PUSH SET
→PUSH SET
+
N
3. Move the cursor to PUSH SET for ZOOM/FOCUS,
and press the CAM (SET) button. ZOOM/FOCUS is
highlighted and "U ZOOM D/L FOCUS R" appears.
** DIRECTION(NESW) **
PAN/TILT
ZOOM/FOCUS
POSI
RET
4. Adjust the zoom or focus with the joystick.
5. Move the cursor to POSI O, and press the CAM
(SET) button. The area title position appears on the
monitor screen. If needed, change the display posi-
tion with the joystick, and press the MON (ESC) but-
ton.
An area title always appears under the camera ID.
If the camera ID and an area title are set to be
shown in separate positions, the area title appears
above the camera ID.
6. Move the cursor to RET, and press the CAM (SET)
button. The SPECIAL 1 menu appears again.
Setting for ON (USER)
If ON (USER) is selected on the SPECIAL 1 menu,
the AREA TITLE (USER) menu appears. The screen
has a number column and title column above RET
and RESET.
PRIVACY ZONE
PROPO.P/T
AREA TITLE
PATROL
ALARM IN/OUT
CLEANING
EL-ZOOM
PRESET ALM
IMAGE HOLD
TILT ANGLE
RET
Note:
An area number followed by an asterisk * has
already been preset.
-37-
→PUSH SET
→PUSH SET
U ZOOM D/L FOCUS R
+
N
FLOOR 1
N
** SPECIAL 1 **
OFF
ON
ON(USER)
STOP
OFF
ON
OFF
OFF
0°