Panasonic PV-DC152 Mode D'emploi page 7

1
2
3
1
2
4
CAMERA
VCR
CARD
P.B.
5, 6
6 7
SEARCH SEARCH
BACKLIGHT
8
CAMERA
FADE
STILL
MULTI/
MAGICPIX TITLE
P-IN-P
CAMERA
VCR
CARD
P.B.
Quick Guide
1
Charge the Battery.
≥Connect the AC Cable to the AC Adaptor and plug it into the AC Wall
Outlet.
≥Attach the Battery to the AC Adaptor. (This will start the charging
process.)
≥The [POWER] Lamp and [CHARGE] Lamp lights up, and charging
starts.
≥When the [CHARGE] Lamp goes off, charging is completed.
≥Since the Battery will not be charged when the DC Cable is connected
to the AC Adaptor, disconnect it.
2
Attach the Charged Battery to the Palmcorder.
3
Insert the Cassette.
≥Slide the [OPEN/EJECT]
open the Cassette Compartment.
≥Insert the Cassette.
OPEN/ OPEN/
EJECT EJECT
≥Press the [PUSH CLOSE]
≥Close the outside compartment Cover.
4
Start recording.
≥Turn the Palmcorder on. (l 14)
M
4 ≥Rotate the Switch
≥Press the
3
≥Press the
To View the Playback Picture
5
Switch to the VCR Mode, rewind the tape, and play the tape
back.
(l 29)
≥Set the
≥Press the
≥Press the
≥Press the
6
Turn the Palmcorder off.
≥Set the
9
M
5
(l 12)
(l 13)
1
Lever toward the front and pull down to
2
to load the Cassette.
(l 20)
3
to [ON]. (The [CAMERA] Lamp lights up.)
4
Button. (Recording starts.)
4
Button again to pause the recording.
5
Switch to VCR mode. (The [VCR] Lamp lights up.)
6
Button. (Rewind the tape.)
7
Button. (Playback starts.)
8
Button. (Playback stops.)
)
(l 14
9
Switch to [OFF].
(l 12)
7