Index Search Functions - Panasonic PV-DC152 Mode D'emploi

1
START/
DATE/ PHOTO
STOP
OSD TIME SHOT
COUNTER RESET TITLE ZOOM
T
MULTI/
REC A.DUB
P-IN-P ¥
V /REW PLAY FF/ W
1
W
6 1 5
STILL ADV PAUSE STILL ADV
E ; D
2
INDEX STOP INDEX
K L
∫
SELECT
VAR. P.B.
SEARCH ZOOM
STORE
MENU
SET
OFF/ON
ITEM
P.B.DIGITAL
A
INDEX
B
S 1

Index Search Functions

To facilitate searching of desired scene, this Palmcorder automatically
records index signals during recording, as explained in the following.
PhotoShot Index Signal
These signals are automatically recorded whenever still pictures are taken in
PhotoShot Mode (l 21).
When recording still pictures using the Continuous PhotoShot Mode (l 21),
the index signal is not recorded.
Scene Index Signal
Scene Index Signals are automatically recorded when you start recording
after inserting a Cassette.
However, if the Palmcorder is switched from the VCR Mode to Camera Mode,
or if the date and time is set before the start of recording, the index signal is
not recorded.
≥If [INDEX] of [RECORDING SETUP] Sub-Menu on the
[CAMERA FUNCTIONS] Main-Menu is set to [2HOUR], an index signal is
recorded when Recording is restarted after a lapse of 2 hours or longer. If it
is set to [DAY], an index signal is recorded when recording is restarted after
the date has changed since the last recording. (While the index signal is
recorded, the [INDEX] indication
ª PhotoShot Index Search
1
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >>
[INDEX] >> [PHOTO].
2
Press the [9] Button or the [
Controller.
≥With each press of the corresponding button, still pictures recorded in
PhotoShot Mode are searched.
≥After Pictures with Sounds are played back for 4 seconds, the Palmcorder
2
switches to the Still Playback Mode.
ª Scene Index Search
1
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >>
[INDEX] >> [SCENE].
2
Press the [9] Button or the [
Controller.
≥When the corresponding Button is pressed once, the [S 1] Indication
appears, and searching of the subsequent scene marked with an index
signal starts. Each time the button is pressed after the start of Scene Index
Search, the indication changes from [S 2] to [S 9], and the beginning of the
scene corresponding to the selected number will be searched. After
reaching the desired scene, playback starts automatically.
≥Up to 9 scene numbers can be selected.
Top Scan
9
If the [ ] Button or the [
the Palmcorder will scan for scenes (or PhotoShots) and playback the first
few seconds of each. (To cancel, press the [
2
.)
≥For other notes, see page 58.
A
flashes for a few seconds.)
:
] Button on the Remote
:
] Button on the Remote
:
] Button is pressed for more than 2 seconds,
1
] Button
B
∫
1
or the [ ] Button
31