Table des Matières
Publicité
ENGLISH
The part reference "B-TC026 ; B-TC026A "
includes the following (Ref. to Fig. 1):
– Basic tool complete with battery
– Shoulder strap
– Spare battery
– Battery charger
– Carrying case type "VAL P9"
2. INSTRUCTIONS FOR USE
(Ref. to Fig. 2)
The tool can be easily carried using either the handle or the shoulder strap attached to
the rings.
2.1) Setting
Insert the conductor between the blades, up to the desired cutting point.
For a running conductor, release the latch (66) and open the tool head.
F
ULLY RETRACT THE LOWER BLADE
.
HEAD
With the conductor on the lower blade (51), close the tool head and fully secure the latch
(66).
Before commencing the cutting operation ensure that the latch (66) is fully secured:
partial closure may damage the tool head.
2.2) Blade advancement
Operate push-button (06) to activate the motor-pump group for the advancement of the
lower blade. To halt the advancement, release the push-button (06) and the motor will
cut out.
2.3) Cutting
Continue operating the push-button (06) to gradually move the lower blade to cut through
the cable.
The motor will continue to operate after the maximum pressure relief valve has activated.
No further cutting force is applied, the oil is bypassed and returned to the reservoir.
2.4) Blade retraction
By pressing down the pressure release button (201) on the body of the tool below push-
button (06), the ram will retract opening the blades.
FIG. 1
(51)
BEFORE ATTEMPTING TO OPEN THE TOOL
3
22
23
30
72
53
72
67
13
72
53
72
53
32
71
68
69
76
80
64
58
59
57
58
59
60
32
19
17
70
16
18
53
204
203
70
18
70
18
21
11
23
47
29
47
26
202
73
14
05
60
EXP0958
Rev. 0 08-03-2006
70
18
20
15
Publicité
Table des Matières
