Maintenance; General Maintenance; Nozzle Maintenance; Accessories - Ryobi PMC1412K Manuel D'utilisation

WARNING:
When servicing, use only identical replacement parts.
Use of any other parts could create a hazard or cause
product damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which could result in serious personal
injury.

NOZZLE MAINTENANCE

Irregular mist patterns or leakage may be the result of a
clogged or dirty nozzle.
To clean nozzles:
 Turn the hose faucet completely off and disconnect the
misting tube from the T-filter.
 Remove the brass nozzles from the misting tube.
 Soak nozzles in nozzle cleaner (not included) or warm
soapy water to loosen foreign materials clogging or
restricting the nozzle.
To order these accessories, call 1-800-525-2579.
 Brass Nozzle ........................................................................................................................................ Model No. PMC080
 Inline Misting Filter ............................................................................................................................. Model No. PMCF009
 Nozzle Cleaner .................................................................................................................................. Model No. PMCC008
 Drain Valve ........................................................................................................................................... Model No. PMC100
WARNING:
Current attachments and accessories available for use with this product are listed above. Do not use any attachments
or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not
recommended can result in serious personal injury.
All manuals and user guides at all-guides.com

MAINTENANCE

 Using a garden hose, flush debris out of nozzle by back
 Reconnect the nozzle to the misting tube.
 Reinstall the misting tube to the T-filter.
CLEANING THE T-FILTER STRAINER
See Figure 9, page 9.
 Remove the strainer cap.
 Remove the strainer from inside the T-filter.
 Thoroughly clean the strainer with water and a soft brush.
 Replace strainer in T-filter and reinstall cap.

ACCESSORIES

6 — English
flushing (running the water through the nozzle backwards
or from the outside to the inside).
NOTE: Do not operate the misting kit without the strainer
installed.
WARNING:
Ensure all components of misting kit are properly
assembled after maintenance has been performed and
that the system does not leak water. Improper hose
connections and/or leaks can result in a slippery surface
and create a slip and fall hazard.
NOTICE:
Ensure garden hose is disconnected and misting kit is
properly drained when not in use and prior to freezing
temperatures. Water remaining in misting kit during
freezing conditions may freeze and damage misting kit.