Maintenance; Lubricating The Blade; General Maintenance - Ryobi P2908 Manuel D'utilisation

WARNING:
To avoid serious personal injury, always remove the bat-
tery pack from the tool when cleaning or performing any

maintenance.

WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
WARNING:
When servicing, use only recommended or equivalent
replacement parts. Use of any other parts may create a
hazard or cause product damage.
NOTICE:
Periodically inspect the entire product for damaged,
missing, or loose parts such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts
are replaced. Please contact customer service or an
authorized service center for assistance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
This product has a Three-year Limited Warranty for personal, family,
or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com
MAINTENANCE
or call (toll free) 1-800-525-2579.
9 — English
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal injury.

LUBRICATING THE BLADE

See Figure 7.
For easier operation and longer blade life, lubricate grass
shear/shrubber blades before and after each use. If you will
be using the grass shear/shrubber for an extended period,
it is advisable to lubricate the blade during use.
 Remove the battery pack.
 Lay the grass shear/shrubber on a flat surface. Apply
light weight machine lubricant along the edge of the top
blade.
NOTE: Do not lubricate while the grass shear/shrubber is
running.
STORING THE GRASS SHEAR/SHRUBBER
See Figure 8.
 Remove the battery pack from the grass shear/shrubber
before storing.
 Clean all foreign material from the grass shear/shrubber.
 Always place the sheath or scabbard on the cutting blades
before transporting or storing the unit.
 Store it in a place that is inaccessible to children.
 Keep away from corrosive agents such as garden chemi-
cals and de-icing salts.