Beurer EM 59 Heat Mode D'emploi page 21

Disposal in accordance with the Waste Electrical
and Electronic Equipment EC Directive – WEEE
This product satisfies the requirements of the ap-
plicable European and national directives.
Manufacturer
The device can emit effective output values above
10 mA, averaged over every 5-second interval
Separate the packaging elements and dispose of
them in accordance with local regulations.
Marking to identify the packaging material.
B
A = Material code, B = Material number:
1-7 = Plastics, 20-22 = Paper and cardboard
A
Separate the product and packaging elements and
dispose of them in accordance with local regulati-
ons.
Storage / Transport
Permissible storage and transport temperature and
humidity
Operating
Permissible operating temperature and humidity.
Included in delivery and accessories
Check that the set packaging has not been tampered with and make
sure that all contents are present. Before use, ensure that there is no
visible damage to the device or accessories and that all packaging
material has been removed. If you have any doubts, do not use the
device and contact your retailer or the specified Customer Service
address.
A B
C
1. Getting to know your device
What is EM 59 Heat, and what can it do?
EM 59 Heat falls into the electrostimulation device category. It
provides four basic functions suitable for combined operation:
1. Electrical stimulation of nerve tracts (TENS)
2. Electrical stimulation of muscle tissue (EMS)
3. A massage effect triggered by electrical stimulation
4. The heat function
The unit also features two independent stimulation channels and
four electrodes. It offers a wide range of functions for increasing
general well-being, pain relief, maintaining physical fitness,
relaxation, muscle revitalisation and combating tiredness.
The principle of electrostimulation devices is based on the imitation
of impulses in our bodies that are transferred to nerve and muscle
fibres using electrodes via our skin. The electrodes can be applied
to many parts of the body; the electrical impulses are completely
harmless and virtually painless. In certain applications you will
only perceive a slight tingling or vibrating sensation. The electrical
21
A
A 4 x electrodes
including gel pads
B 1 x EM59 Heat unit
C 1 x connection cable
D 1 x belt clip
D