Calling Up Information Messages - Lenze EPM-H515 Instructions De Mise En Service

6.3

Calling up information messages

Information messages
ƒ
–
are texts which appear because of a certain event (e.g. if an actual value
exceeds a limit).
–
can only be called up as long as the triggering event is active.
–
must have been programmed in the "HMI Designer" planning tool.
–
can be up to 4 lines of 70 characters long each (single character size).
The second to last line contains a programmable message field. This field
ƒ
indicates the numerical size of the variables activated by the message.
The last line shows the date and time when the message was initiated.
ƒ
signals when an information message is present.
ƒ
Symbols and characters in the information messages
Symbols/characters used in the line for
If you want to ...
A ... call up an information message.
B ... select the next information
messages.
C ... close the information messages.
EDBPM-H515 DE/EN/FR 2.0
date/time
HELP
Touch the fields...
ESC
Calling up information messages
Meaning
The information message has been called up for the
first time
Help is assigned to the information message. (
Example
or
Operation
82)
Pressure exceeds
safety limit
125.5
ESC
13-09-2000 10:45a HELP
Temperature exceeds
safety limit
1700
13-09-2000 10:55a HELP
Water level below Water level below Water level below Water level below Water level below Water level below Water level below
working threshold working threshold working threshold working threshold working threshold working threshold working threshold
-10 -10 -10 -10 -10 -10 -10
ESC ESC ESC ESC ESC ESC ESC
13-09-2000 11:00a HELP 13-09-2000 11:00a HELP 13-09-2000 11:00a HELP 13-09-2000 11:00a HELP 13-09-2000 11:00a HELP 13-09-2000 11:00a HELP 13-09-2000 11:00a HELP
6
79