Lenze EPM-H515 Instructions De Mise En Service page 70

5 Commissioning
Status messages of the operating unit
5.3 Status messages of the operating unit
The operating unit status can be queried any time. Information can be obtained
about
the interface (port)
ƒ
the name of the loaded driver
ƒ
the version of the loaded driver (Ver)
ƒ
mains address of the operating unit (Addr)
ƒ
the last error
ƒ
If you want to ...
A ...query the status of the operating
unit
For this purpose, touch the display
in the corners
– top right and bottom left
– top left and bottom right .
The first corner to be touched must
not contain a selectable field.
B ... close the status display.
70
Touch the fields...
or
ESC
Example
2
1
Port Port Port Port Port Port : NET : NET : NET : NET : NET : NET
Driver Driver Driver Driver Driver Driver : CAN Lenze M : CAN Lenze M : CAN Lenze M : CAN Lenze M : CAN Lenze M : CAN Lenze M
Ver Ver Ver Ver Ver Ver : 1.12 : 1.12 : 1.12 : 1.12 : 1.12 : 1.12
Addr Addr Addr Addr Addr Addr : NO ADDRESS : NO ADDRESS : NO ADDRESS : NO ADDRESS : NO ADDRESS : NO ADDRESS
Error Error Error Error Error Error : RESET : RESET : RESET : RESET : RESET : RESET
EDBPM-H515 DE/EN/FR 2.0
0
3
PROG PROG PROG PROG PROG PROG
TRAN TRAN TRAN TRAN TRAN TRAN
PAGE PAGE PAGE PAGE PAGE PAGE
ESC ESC ESC ESC ESC ESC