Lenze EPM-H515 Instructions De Mise En Service page 71

5.4 Date/Time and contrast setting
If you want to ...
A ... set date/time and contrast on the
dislay.
1. Call up status messages. For this
purpose, touch the display in the
corners
– top right and bottom left
– top left and bottom right .
The first corner to be touched must not
contain a selectable field.
2. Select menu for time/date and
contrast.
B ... set date/time.
1. Touch field "SET CLOCK" to select
the menu.
2. Select desired field.
3. Change value.
4. If required, repeat steps 2. and 3. to
change further values.
5. Confirm the input.
– The menu for time/date and
contrast is displayed.
EDBPM-H515 DE/EN/FR 2.0
Date/Time and contrast setting
Touch the fields ...
or
PROG
or
or
Commissioning
Example
2
1
Port Port : NET : NET
Driver Driver : CAN Lenze M : CAN Lenze M
Ver Ver : 1.12 : 1.12
Addr Addr : NO ADDRESS : NO ADDRESS
Error Error : RESET : RESET
SET CONTRAST : 04 SET CONTRAST : 04 SET CONTRAST : 04 SET CONTRAST : 04 SET CONTRAST : 04
SET CLOCK: SET CLOCK: SET CLOCK: SET CLOCK: SET CLOCK:
Wed,13/09/00 Wed,13/09/00 Wed,13/09/00 Wed,13/09/00 Wed,13/09/00
12:50:10 12:50:10 12:50:10 12:50:10 12:50:10
12:50:10 13/09/00 12:50:10 13/09/00 12:50:10 13/09/00 12:50:10 13/09/00
5
0
3
PROG PROG
TRAN TRAN
PAGE PAGE
ESC ESC
ESC ESC ESC ESC ESC
ESC ESC ESC ESC
71